Welcome to the website of Yingkou Zhongyan Magnesia Brick Technology R&D Co., Ltd.!

Language:image.png    image.png        

新闻资讯

News

current position: Home > News > Company News

Contact usContact Us

Yingkou Zhongyan magnesia brick technology research and Development Co., Ltd

Address: Guantun Town, Dashiqiao City, Liaoning Province

Tel: 13464462696

Contact: Manager Hou

Website: http://www.ykzymz.cn

Email: houxiwen2010@163.com

QQ: 1419518016

Features of magnesia carbon brick

2022-02-15 15:19:44
times

There are two kinds of brick-making methods for magnesia-carbon bricks: fired oil-impregnated magnesia-carbon bricks and unburned magnesia-carbon bricks. The former brick-making process is more complicated and seldom used. Here, only the characteristics of the brick-making process of unburned magnesia-carbon bricks are briefly described.

Preparation of mud. For magnesia-carbon brick manufacturers, the choice of particle critical size is important when breeding. Magnesia-chrome bricks with finer aggregate particles can reduce open porosity and enhance antioxidant capacity. However, the small aggregate particles will increase the closed pores and reduce the bulk density. In addition, fine-grained MgO aggregates are easy to react with graphite, and it is generally considered that the particle size of 1 mm is suitable. Under the condition of high pressure molding equipment, the particles of magnesia tend to be micronized. The pressure of molding equipment in my country is low. In order to increase the density of refractory bricks, many manufacturers use particle diameters of more than 5mm.

镁铬砖

The quality and quantity of graphite added to the ingredients are critical. Generally speaking, increasing the graphite content in the refractory brick will improve the slag resistance and thermal shock stability of the refractory brick, but the strength and oxidation resistance will decrease. If the network skeleton cannot be formed in the refractory brick, the advantages of carbon cannot be effectively exerted. Therefore, the carbon content is more suitable in the range of 10-20%.


Magnesia zirconium brick price


During the mixing process, in order to make the graphite evenly surround the magnesia particles, the feeding sequence should be: magnesia particles → binder → graphite → magnesia fine powder and additive powder. Due to the large graphite content, low density and very small amount of additives, it takes a long time to mix evenly, but if the mixing time is too long, the graphite and fine powder around the magnesia particles will easily fall off, so the mixing time should be appropriate.


The molding of magnesia-carbon bricks is an important factor to densify the structure of the refractory bricks: due to the large amount of graphite in the mud and the small critical particles of the aggregates, it is advisable to use high-pressure molding and strictly follow the operation of light first and then heavy, and multiple pressurization operations. Suppressed regularly to avoid forming cracks. It is best to use the operating procedures of vacuuming and exhausting pressurization. In addition, the surface of the high-pressure molded brick is very smooth, and it is easy to slide during transportation and construction, so the molded brick should be impregnated or coated with a 0.1-2mm thick thermosetting resin to form a resin film to prevent sliding. This treatment is generally referred to as anti-slip treatment.


The formed magnesia-carbon bricks must be hardened before they can be used. The temperature of hardening has a great influence on the performance of refractory bricks. Studies have shown that the hardening treatment at 200-250 °C is more suitable. It is suitable for ensuring the bulk density of the brick and reducing the porosity. When the temperature is higher than 250 °C and lower than 200 °C, the hardening treatment will bring adverse effects. Strictly ascend and control the air. Usually at 50-60 ℃, due to the softening of the resin, it should be properly kept warm; at 100-110 ℃, due to the large amount of solvent discharged, it should be kept warm; at 200-250 ℃, in order to make the reaction complete, it should also be properly kept warm.


Tags