Welcome to the website of Yingkou Zhongyan Magnesia Brick Technology R&D Co., Ltd.!

Language:image.png    image.png        



current position: Home > News > Company News

Contact usContact Us

Yingkou Zhongyan magnesia brick technology research and Development Co., Ltd

Address: Guantun Town, Dashiqiao City, Liaoning Province

Tel: 13464462696

Contact: Manager Hou

Website: http://www.ykzymz.cn

Email: houxiwen2010@163.com

QQ: 1419518016

The principle of using regenerative bricks in industrial kiln production?

2022-02-15 15:48:31

Heat storage bricks bring safety guarantee to people in the field of safety, but at the same time, some heat storage bricks are partially damaged due to the influence of external conditions, so we need to maintain and repair these heat storage bricks. The following heat storage bricks will introduce you to the matters needing attention when repairing bricks: magnesia brick manufacturers

1. Bricks must be made of the same batch of bricks from the same heat storage brick manufacturer as the old bricks;

2. Use the remaining loose bricks from the same inspection as the old bricks as much as possible (Note: Bricks that are damp or damaged are strictly prohibited)

3. The contact surface of the new and old bricks must be made of fire clay;

4. Iron plates cannot be struck between the interface surfaces of the new and old bricks;



Magnesia brick manufacturers

5. The cracks on both sides of the locking bricks cannot be hit with iron plates, the iron plates of the adjacent two ring bricks should be staggered from each other, and the two sides of the same brick cannot be hit with iron plates;

6. The iron plate must be completely driven into the brick seam;

7. The sealing of the first few rings of bricks must be inserted from the side, and the front of the next ring of bricks must be sealed with bricks;

8. The masonry shall be built in strict accordance with the proportion of designed bricks, and the proportion of masonry shall not be changed at will;

9. The expansion joint cardboard of the excavated and repaired bricks must not be torn off, and the excavated and repaired bricks must be wet laid (the fullness of the fire mud should reach more than 95%. Timely dismantling and rebuilding;

10. Do not use (or reduce the use of) processed bricks as much as possible when digging and repairing.